Print this page »
DIN WL 2.0958
A German bar and forging specification for a manganese aluminium bronze CuAl8Mn WN 2.0958.08. The alloy is mainly used in the defence and commercial ship building programmes and can be manufactured with a relative magnetic permeability reading below 1.03ยต. The alloy has medium strength and good sea water corrosion resistance.
| Description |
Manganese Aluminium Bronze Alloy |
| Nominal Composition |
CuAl8Mn |
| Alloy Type |
Wrought |
Typical Mechanical Properties
| Tensile Strength (N/mm²) |
540 |
| Proof/Yield Strength (N/mm²) |
240 |
| Elongation (%) |
22 |
| Hardness Brinell |
135 |
| Impact Izod J20°C |
9 |
Typical Physical Properties
| Density g/cm³ |
7.6 |
| Melting Temperature Range °C |
950-1050 |
| Thermal Conductivity W/mK |
34 |
| Electrical Resistivity μΩ.m15°C |
11.5 |
| Coefficient of Thermal Expansion 0-250°C |
18 |
| Relative Magnetic Permeability |
1.03 |
| Coefficient of Friction |
|
Copper Alloys Ltd has the ability to modify existing alloys for improved performance. Many customers have benefited from this in the past.
To discuss your requirements, call a member of Copper Alloys Ltd's technical team on +44 (0) 1782-816888, or email sales@copperalloys.net.
This Data is indicative only and must not be seen as a substitute for the full specification from which it is drawn. In particular, the mechanical property requirements vary widely with tempeter, product and product dimensions. The information is based on our present knowledge and is given in good faith. However, no liability will be acepted by the Company in respect of any action taken by any third party in reliance thereon.
As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose.
Any advice given by the Company to any third party is given for that party's assistance only and without liability on the part of the Company. Any contract between the Company and a customer will be subject to the Company's Conditions of Sale. The extent of the Company's liabilities to any customer is clearly set out in those Conditions, a copy of which is available on request.
