UNS S32760 super duplex is used in a wide range of marine, oil and gas environments.
Mining, marine, pharmaceutical, petrochemical and chemical engineering industries. Typical applications include flanges, pumps, valves, chokes, connecters and manifolds.
Tel +44 (0) 1782-816888
|
S32760 super duplex grade has enhanced pitting and crevice corrosion resistance in comparison with the ordinary austenitic or duplex types and is suitable for use in aggressive environments. This is due to the higher additions of chromium, molybdenum and nitrogen. This austenitic stainless type grade combines high strength and good ductility with outstanding corrosion resistance qualities. UNS S32760 has excellent resistance to stress corrosion cracking and gives a high resistance to erosion corrosion and corrosion fatigue.
Description | Super Duplex Stainless Steel |
---|---|
Nominal Composition | FeCrNiMoCu |
Alloy Type | Wrought |
Tensile Strength (N/mm²) | 730 |
---|---|
Proof/Yield Strength (N/mm²) | 530 |
Elongation (%) | 25 |
Hardness Brinell | 290 |
Impact Izod J20°C | 100 |
Density g/cm³ | 7.8 |
---|---|
Melting Temperature Range °C | 1400-1450 |
Thermal Conductivity W/mK | 15 |
Electrical Resistivity μΩ.m15°C | 99 |
Coefficient of Thermal Expansion 0-250°C | 13 |
Relative Magnetic Permeability | 2.3 |
Coefficient of Friction |
This Data is indicative only and must not be seen as a substitute for the full specification from which it is drawn. In particular, the mechanical property requirements vary widely with tempeter, product and product dimensions. The information is based on our present knowledge and is given in good faith. However, no liability will be acepted by the Company in respect of any action taken by any third party in reliance thereon.
As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose.
Any advice given by the Company to any third party is given for that party's assistance only and without liability on the part of the Company. Any contract between the Company and a customer will be subject to the Company's Conditions of Sale. The extent of the Company's liabilities to any customer is clearly set out in those Conditions, a copy of which is available on request.