Tel +44 (0) 1782-816888
|
904d is a Phosphor Bronze with a higher Tin content than PB1, which means it has excellent resistance to wear. As a result of these properties, PB2 is an ideal material for the manufacture of components such as gears and heavy sliding or reciprocating loads. AS 1565 1974 904d has good machining properties, high strength and good corrosion resistance to seawater and brine, making it suitable for pump and valve components. 904d is suitable for bearings having medium to high loads and speeds, and has good resistance to impact loading or pounding.
Description | Phosphor Bronze |
---|---|
Nominal Composition | CuSn11P |
Alloy Type | Cast |
Tensile Strength (N/mm²) | 420 |
---|---|
Proof/Yield Strength (N/mm²) | 190 |
Elongation (%) | 20 |
Hardness Brinell | 120 |
Impact Izod J20°C |
Density g/cm³ | 8.8 |
---|---|
Melting Temperature Range °C | 831-999 |
Thermal Conductivity W/mK | 47 |
Electrical Resistivity μΩ.m15°C | 0.17 |
Coefficient of Thermal Expansion 0-250°C | 18 |
Relative Magnetic Permeability | 1.001 |
Coefficient of Friction |
This Data is indicative only and must not be seen as a substitute for the full specification from which it is drawn. In particular, the mechanical property requirements vary widely with tempeter, product and product dimensions. The information is based on our present knowledge and is given in good faith. However, no liability will be acepted by the Company in respect of any action taken by any third party in reliance thereon.
As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose.
Any advice given by the Company to any third party is given for that party's assistance only and without liability on the part of the Company. Any contract between the Company and a customer will be subject to the Company's Conditions of Sale. The extent of the Company's liabilities to any customer is clearly set out in those Conditions, a copy of which is available on request.