Equivalent Specifications
BS EN 12420 1999 CW306G
DIN 2.0971
DIN 17665 1983 2.0971
Key Features
A high strength alloy even at elevated temperature
with high fatigue strength under reversed stresses.
Good corrosion resistance in sea water, and also in
neutral and acid aqueous conditions. Good resistance to erosion and cavitation corrosion.
Typical Uses
Industrial: Construction parts for the chemical industry
Fasteners: Nuts and bolts
General Engineering: Worm wheels, bushes and bearings
Print this page »
DIN 17665 W Nr 2.0936
A German complex Aluminium Bronze CuAl10Fe3Mn2 (AlBz10Fe, CuAl10Fe).A high strength aluminium bronze which has good cold and hot working properties and can easily be welded and is typically used for oil coolers, desalination plants, condenser end plates and the potash industry. The alloy can be specified to DIN 17670/17673/17678/17672-1, EN 12163/12165/12167/12420 CW306G, GOST 18175 GOST 1628 BrAZMc10-3-1.5 and GB5233 GB 4429.
Description |
Nickel Aluminium Bronze |
Nominal Composition |
CuAl10Fe3Mn2 |
Alloy Type |
Wrought |
Typical Mechanical Properties
Tensile Strength (N/mm²) |
570 |
Proof/Yield Strength (N/mm²) |
225 |
Elongation (%) |
11 |
Hardness Brinell |
125 |
Impact Izod J20°C |
|
Typical Physical Properties
Density g/cm³ |
7.6 |
Melting Temperature Range °C |
1050-1110 |
Thermal Conductivity W/mK |
53.65 |
Electrical Resistivity μΩ.m15°C |
14.3 |
Coefficient of Thermal Expansion 0-250°C |
16.2 |
Relative Magnetic Permeability |
1.1 |
Coefficient of Friction |
|